HP Pavilion x360 convertible 15 User Manual

Table 5-3 Solid-state drive descriptions and part numbers (continued)
Description Spare part number
256 GB, PCIe + 16 GB Optane memory L85356-005
Thermal pad for use with solid-state drive M45025-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 29).
2. Remove the bottom cover (see Bottom cover and rubber feet on page 29).
3. Disconnect the battery cable from the system board (see Battery on page 31).
Remove the solid-state drive:
1. Remove the tape that secures the solid-state drive metal cover (1).
2. Remove the Phillips M2.0 × 2.0 screw (2) that secures the cover and drive to the computer.
3. Lift the metal cover o the solid-state drive (3).
4. Pull the drive away from the socket to remove it (4).
To install the solid-state drive, reverse the removal procedures.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-4
Memory module descriptions and part numbers
Description Spare part number
8 GB, DDR4-3200 L46598-005
Memory modules 33

HP Pavilion x360 convertible 15 Specifications

General

Brand	HP
Model	Pavilion x360 convertible 15
Category	Laptop
Language	English