2 Modem Command Guidelines
Modem Command Guidelines
Identifying Your Modem
To display the model name of the modem in your notebook:
1. Select Start.
2. Right-click My Computer > Properties > Hardware tab >
Device Manager button.
3. Double-click Modems. (An icon and name for your modem
is displayed.)
4. Double-click the modem name icon. (The modem model
name is displayed.)
Accessing Your Command Set
After you identify the model name of your notebook, refer to
the modem manufacturer’s Web site to obtain an updated
command set.
Using Commands on the Notebook
Entering a Command
When entering modem commands on the notebook:
■ You must start every AT command line (except the A/ and
+++ commands) with the attention (
AT) code characters. If
you do not begin the command line with the attention (
AT)
code characters, the modem will not execute the command.
■ You must type the AT prefix in the same case (AT or at, not At
or
aT).
■ You may type commands following the AT prefix in all
uppercase, all lowercase, or any combination of uppercase
and lowercase letters.
■ You may enter telephone numbers with or without
punctuation, for example, (123) 456-7890 or 1234567890.
316740-002.book Page 2 Thursday, May 1, 2003 1:40 PM
To Next Page
Loading...
Need help?
General