4. Double-click the file that has an .exe extension (for example, filename.exe).
The BIOS installation begins.
5. Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file
from your hard drive.
Synchronizing a tablet and keyboard (select models only)
When you attach a tablet to the keyboard and restart the computer, the BIOS checks to see if the Embedded
Controller firmware on the keyboard needs to be synchronized. If so, BIOS will start the synchronization. If
the synchronization is interrupted, a notification screen displays for 10 seconds before the tablet restarts
and attempts to synchronize again.
NOTE: The Embedded Controller firmware will synchronize ONLY if the tablet or keyboard battery is more
than 50% charged, or if your tablet is connected to AC power.
Synchronizing a tablet and keyboard (select models only) 71
To Next Page
Loading...
Need help?
General
