HP ProCurve 2510 User Manual

9-15
Time Protocols
TimeP: Viewing, Selecting, and Configuring
Menu: Viewing and Configuring TimeP
To View, Enable, and Modify the TimeP Protocol:
1. From the Main Menu, select:
2. Switch Configuration...
1. System Information
Figure 9-9. The System Information Screen (Default Values)
2. Press
[E] (for Edit). The cursor moves to the System Name field.
3. Use [v] to move the cursor to the Time
Sync Method field.
4. If
TIMEP is not already selected, use the Space bar to select TIMEP, then
press [v] once to display and move to the TimeP
Mode field.
5. Do one of the following:
• Use the Space bar to select the DHCP mode, then press [v] to move
the cursor to the Poll
Interval field, and go to step 6.
Time Protocol Selection Parameter
– TIMEP (the default)
–SNTP
– None

HP ProCurve 2510 Specifications

General

Brand	HP
Model	ProCurve 2510
Category	Switch
Language	English