EasyManuals Logo
Home>HP>Switch>ProCurve 4100GL Series

HP ProCurve 4100GL Series User Manual

HP ProCurve 4100GL Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Software Fixes
Release G.05.05
Crash (PR_5712) — The switch may crash with a message similar to: TLB Miss: Virtual
Addr=0x00000000 IP=0x8002432c Task='tSmeDebug'
Crash (PR_5745) — The switch may crash with a message similar to: Divide by Zero Error:
IP=0x801400c0 Task='sal_dpc_hi' Task ID=0x80616690 fp:0x00000000 sp:0x80616600
ra:0x800140060 sr:0x1000af01
Module (PR_5270) — Modules intermittently fail to boot during switch boot up.
Release G.05.05
Never released.
ARP (PR_4880) Changing the IP address of an interface does not flush the ARP entries
of the original IP address.
CLI/Timezone (PR_4992) The timezone changes made for PR_4524 are not transparent
to the end-user. On download of configuration, and during initialization, check for a transition
from code G.04.XX to G.05.XX and adjust configured timezone.
Configuration (PR_5025) — If the user enables portfast (that is, “spanning-tree 1-24 mode
fast”) the switch can't read the configuration during reload and stops the reload process.
Crash (PR_4892) — The switch may crash with a message similar to: -> Asserts in rv.cc
line 632
Crash (PR_5345) — The switch may crash with a message similar to: -> Assertion failed:0,
file drvmem.c, line 167
Crash (PR_5708) The switch may crash with a message similar to: -> Unalligned Access:
Virtual Addr=0x847e6929 IP=0x800270bc Task='tMsgCount' Task ID=0x804bf800
fp:0x804bf788 sp:0x804bf788 ra:0x800270b4 sr:0x1000af01
Crash (PR_5714) — The switch may crash with a message similar to: -> Bus error: HW
Addr=0x00000000 IP=0x002f6148 Task='mHttpCtrl'
Crash (PR_5715) — The switch may crash with a message similar to: -> Bus error: HW
Addr=0x00000000 IP=0x001429e0 Task='mChassCtrl' Task ID=0x16d0748
Crash (PR_5725) The switch may crash with a message similar to: -> Assertion failed:
nt, file dpc.c, line 169
Crash/Continuous Reboot (PR_5046) — Downloading a certain configuration will cause
the switch to bus error and reboot repeatedly.
GVRP (PR_4898) Upstream GVRP neighbor loses connectivity with downstream
neighbor after topology change.
14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProCurve 4100GL Series and is the answer not in the manual?

HP ProCurve 4100GL Series Specifications

General IconGeneral
BrandHP
ModelProCurve 4100GL Series
CategorySwitch
LanguageEnglish

Related product manuals