36
The user package has been successfully created.
You can:
• Browse to the noted Path where package was created.
• Run Setup.exe on designated host.
Additional Information
Using a Smart Card For Windows Network Login
During windows logon, a normal Windows logon prompt should appear with a smart card reader icon
on the left. After installing GemSafe Libraries users setups, restart the system. A normal Windows logon
screen should appear with a smart card reader icon on the left. The system will recognize the smart card
reader and will prompt you to insert your GemSafe smart card.
Upon the insertion of the GemSafe smart card into the smart card reader, you will be prompted to present
a User PIN. By default, the User and Administrator PINs are '1234' unless the Administrator has previ-
ously set-up an alternate PIN. A User or Administrator is limited to three incorrect PIN entries before the
PIN is blocked. Please check with your Administrator prior to submitting a PIN to ensure you have the
proper one.
NOTE: If the User PIN is blocked, it can be unblocked if the Administrator has granted the User the right
to unblock the PIN. If the user does not have this privilege, he or she should contact the Administrator to
unblock the PIN. The Administrator can unblock the PIN by entering the Administrator PIN. However, if
the Administrator enters three incorrect PINs in an effort to unblock a PIN, the card will no longer be
usable.
Administration of the GemSafe Smart Card
Gemalto has designed the GemSafe ToolBox to manage GemSafe smart cards. The GemSafe ToolBox
allows the User (based on privileges) or the Administrator to change and verify the PINs, view card and
system information, and register certificates. For the Administrator, GemSafe ToolBox is used to create
Users Setups by granting different access rights to users.
Working with GemSafe Libraries
Now that GemSafe Libraries is installed, please refer to the GemSafe Libraries Administration or User
Guide to learn how to:
• Manage the smart cards and certificates used with GemSafe Libraries
• Use GemSafe Libraries to log on/off and lock/unlock your Windows 2000, XP workstation, Win-
dows 2000 and 2003 Servers.
• Use a digital certificate to improve e-mail security and browse secure web sites.
• Use a certificate to sign Adobe Acrobat® or Microsoft Office XP or 2003 macros.
To Next Page
Loading...
Need help?
General