40
4. In Internet Explorer, type the address of a secure Web site.
5. If the system displays security alert messages, click OK.
The LED on the card reader indicates when the Web site is accessing the smart card to verify whether
the certificate is approved for the site.
6. After the secure Web site displays, a lock icon in the lower right corner of Internet Explorer confirms
that you are connected to a secure Web site.
Usage case 5: User authentication using VPN through firewall to blade PC
or Active Directory Server
Instructions for installing and configuring a VPN tunnel with a firewall is beyond the scope of this white
paper; therefore, the white paper assumes the VPN tunnel and firewall are already installed and func-
tional. The white paper also assumes that you have a broadband Internet connection and that Gemalto
smart card middleware is installed on the client.
1. In the Control Panel on the client computer, open Network and Internet Connections.
2. Select the Create a connection to the network at your workplace task.
3. In the New Connection Wizard, select Virtual Private Network connection.
To Next Page
Loading...
Need help?
General