3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Installing the Monitor Base
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-
uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its
normal condition.
1. Lift the monitor from its box and place it face down on a flat surface covered by a soft, clean cloth.
2. Press the base onto the pedestal (1) and secure it with the screw provided (2).
Figure 3-1 Installing the Monitor Base
4 Chapter 3 Setting Up the Monitor ENWW
To Next Page
Loading...
Need help?
General
