Step 1—Preparing the workstation
Introduction
This section describes how to prepare your workstation for disassembly.
Procedure: preparing the workstation for disassembly
To prepare the workstation for component installation:
Step Action
1 Power down the workstation.
2 Disconnect power from the workstation.
3 Open the access cover.
References
Your workstation documentation includes instructions for disassembling and preparing the workstation
for installation.
For product-specific information, see the Service and Technical Reference Guide for your HP
workstation at
http://www.hp.com/support/workstation_manuals.
ENWW Step 1—Preparing the workstation 3
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To Next Page
Loading...
Need help?
General