18
disappears. When disappears, it indicates that the Wi-Fi is disabled.
Establishing a WPS Connection
If the Wi-Fi Clients connected to the E5 support the WPS function, the E5 can
generate a network key without manual input. To establish a WPS connection,do as
follows:
1. Power on the E5.
2. Start the Clients connected to the E5.
3. Enable the WPS function of the E5.
Note: By pressing and holding
, you can enable the WPS function of the
E5.
4. Enable the WPS function of the Clients.
Note: For the Wi-Fi operations of the Clients, see the Clients’ user guide.
To Next Page
Loading...
Need help?
General
