Productive nap
• Touch the Sleep card on the Health screen of the Huawei Health app, swipe to nd and
touch Productive nap. Touch the settings icon in the upper right corner to set an alarm or
nap reminder.
• Swipe to select a break time and touch START to enable the alarm. Touch the icons at the
bottom of the screen to select, play, turn o, and set a time for sleep music.
Viewing your sleep data
Touch the Sleep card on the Health screen of the Huawei Health app to view your daily,
weekly, monthly, and yearly sleep data.
Measuring SpO2
• To ensure the accuracy of the SpO2 measurement, wear the watch properly and ensure
the strap is fastened. Ensure that the monitoring module is in direct contact with your
skin without any obstructions.
Single SpO2 measurement
1 Wear your watch correctly and keep your arm still.
2 From the home screen, press the Up button, swipe on the screen, and touch SpO2.
3 For some products, touch Measure. The actual product prevails.
4 Keep your body still during the SpO2 measurement.
• The measurement will be interrupted if you swipe right on the watch screen, start a
workout with the Health app, or receive a notication for an incoming call or alarm.
• Data provided is for reference only and not for medical use. Consult a doctor as soon
as possible if you feel uncomfortable.
• During the SpO2 measurement, the watch will also measure your heart rate.
• This measurement may also be aected by some external factors such as low blood
perfusion, tattoos, a lot of hair on your arm, a dark complexion, lowering or moving
your arm, or low ambient temperatures.
Automatic SpO2 measurements
1 Open the Huawei Health app, touch Devices and then your device name, touch Health
monitoring, and enable Automatic SpO2 measurement. The device will then
automatically measure and record your SpO2 when it detects that you are still.
2 Touch Low SpO2 alert to set the lower limit of your SpO2 for you to receive an alert
when you are not asleep.
Health Management
16
To Next Page
Loading...
Need help?
General
