6
When configuring the HG531 V1 for the first time, use an Ethernet cable to connect the HG531 V1
to a computer.
Powering On
To power on the HG531 V1, press its power button.
After the HG531 V1 is powered on, the HG531 V1 indicator turns on. If the indicators do not behave as
expected, ensure that everything is plugged in correctly.
3
Setting Network Parameters
Setting the Computer IP Address
Before logging in to the HG531 V1 web management page, set the IP address of the computer that will
be used for the login.
On Windows 7
1.
Choose
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
.
2.
Choose
Change adapter settings
. Right-click
Local Area Connection
and choose
Properties
.
3.
Double-click
Internet Protocol Version 4 (TCP/IPv4)
.
4.
Select
Obtain an IP address automatically
and
Obtain DNS server address automatically
. Click
OK
.
On Windows Vista
1.
Choose
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
.
2.
Choose
Manage network connections
. Right-click the connection that you want to change, and then click
Properties
.
3.
Double-click
Internet Protocol Version 4 (TCP/IPv4)
.
4.
Select
Obtain an IP address automatically
and
Obtain DNS server address automatically
. Click
OK
.
On Windows 8
1.
Choose
Settings
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
.
2.
Choose
Change adapter settings
. Right-click the connection that you want to change, and then click
Properties
.
3.
Select
Internet Protocol Version 4 (TCIP/IPv4)
, and click
Properties
.
4.
Select
Obtain an IP address automatically
and
Obtain DNS server address automatically
. Click
OK
.
To Next Page
Loading...
Need help?
General
