10
3 Setting the Network-Access
Parameters
3.1 Logging In to the Web-Based Configuration
Utility
The HG532e provides an easy-to-use Web-based configuration utility. You can
view and set the parameters of the HG532e through this utility.
To log in to the Web-based configuration utility, do as follows:
Step 1 Set the network connection of your PC and ensure that your PC
obtains an IP address automatically, do as follows:
1. In the Control Panel window, double-click Network Connections to
display the Network Connections window.
2. In the Network Connections window, right-click the working Local
Area Connection and choose Properties.
3. In the This connection uses the following items group box of the
Local Area Connection Properties dialog box, select Internet
Protocol (TCP/IP). Click Properties.
4. Ensure that your PC select Obtain an IP address automatically.
Step 2 Start the Internet Explorer on your PC and ensure that the Internet
Explorer does not use any proxy server.
Take the Internet Explorer 6.0 as an example. To ensure that the Internet
Explorer does not use any proxy server, do as follows:
1. Launch the Internet Explorer on your computer.
2. Choose Tools > Internet Options.
3. On the Connect tab of the Internet Options dialog box, click LAN
Settings.
By default, the DHCP function of the HG532e is enabled. In this case,
the HG532e assigns an IP address to your PC automatically and you
do not need to configure the IP address of your PC.
To Next Page
Loading...
Need help?
General
