16
Using the Reset Button
If you forget the login password to the web management page or could not access the web
management page, use the RESET button on the HG532f rear panel to restore the HG532f to its
default settings. Perform this operation with caution. After the HG532f is restored to its default settings,
all custom data and settings will be lost, and the password will be restored to user.
1. Press the HG532f power button to power the HG532f on.
2. Press and hold the RESET button for 6 seconds or more.
The HG532f will restart, which will cause temporary network interruptions.
After the HG532f is restored to its default settings, change the computer IP address so that it
is in the same network segment as the 192.168.1.1 default IP address.
To Next Page
Loading...
Need help?
General
