Settings
137
Sound settings
Change the incoming call and message ringtones or set the system alert sound and vibration
effects.
Go to
Settings
and then touch
Sound
. You can configure the following settings:
•
Volume
: Adjust the ringtone, media, alarm, and call volume.
•
Silent mode
: Once enabled, your phone will not ring when you receive an incoming call or
message, but the screen will still turn on. If you have also enabled
Vibrate in silent mode
, your
phone will vibrate to alert you of incoming calls and messages.
You can also enable or disable these features in the shortcuts tab. Touch to switch
between
Sound
,
Vibration
, and
Silent
.
•
Select a ringtone under
Call ringtone & vibration
to change the ringtone. You can choose
from preset ringtones or a local music file. Turn on the switch to enable vibrations when your
phone rings.
•
Default notification tone
: Choose a preset ringtone or a local music file as the notification
tone for messages, emails, and other notifications.
•
When using your phone to listen to music or watch videos, insert a headset and enable
Headset DTS mode
for a stunning DTS multichannel surround sound experience.
•
Touch the switches under
System
to enable or disable dial pad touch tones, touch sounds,
screen lock sounds, screenshot tones, power on or off tones, and haptic feedback.
The above options may not be available on all phone models.
Changing the screen unlock method
Set a screen lock password to prevent unauthorized access to your phone.
Setting a screen unlock pattern
1
Open
Settings
.
2
Touch
Screen lock & passwords
>
Password
>
Pattern
.
3
Connect at least four dots to create a screen unlock pattern, and then release your finger. Draw
your screen unlock pattern again to confirm.
4
Enter a backup PIN containing at least four digits. If you forget your screen unlock pattern, you
can enter the backup PIN to unlock the screen.
Unlocking the screen with a password
1
Open
Settings
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
