EasyManuals Logo
Home>Huawei>Network Router>WiFi Q2

Huawei WiFi Q2 User Manual

Huawei WiFi Q2
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Indicator
When other HUAWEI routers (with H or Hi button) are detected, the indicator will flash.
When this happens, press the router's H button. The indicator should flash quickly,
indicating that the pairable device is connecting to the router's Wi-Fi. The connection
process is complete when the indicator stops flashing.
Flashing
Steady red
Steady blue Connected to the Internet.
Not connected to the Internet.
The router has detected a pairable device.
Ensure that the Ethernet cable is properly connected.
Ensure that the Ethernet cable and the power cable are not bundled together.
Ensure that all three routers are connected to wall sockets.
Connect it to a different wall socket to ensure all three routers are on the same
circuit, and try again.
Ensure that the distance between any two routers is less than 10 meters and there
are no more than two walls in between.
Contact your carrier to check for any network failure.
If you touch the H button accidentally, wait for approximately two minutes and
the indicator will be reset automatically.
Indicator

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei WiFi Q2 and is the answer not in the manual?

Huawei WiFi Q2 Specifications

General IconGeneral
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1167 Mbit/s
WLAN data transfer rate (first band)300 Mbit/s
WLAN data transfer rate (second band)867 Mbit/s
Product typeTabletop router
Product colorWhite
Ethernet LANYes
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Memory card slot(s)No
Ethernet LAN (RJ-45) ports3
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)24 W
Processor modelRealtek RTL8197F + Realtek RTL8812BR + Hisilicon Hi5630 + HiSilicon Hi1151
Security algorithmsAES, TKIP, WPA-PSK, WPA2-PSK
DSL WAN-
WAN connection typeRJ-45
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Cables includedAC, LAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth75 mm
Width112 mm
Height183.5 mm
Weight495 g

Related product manuals