40
6. In the displayed dialog box, click OK.
Using the Reset Button
If you forget the login password to the web management page or could not access the web
management page, use the reset button on the WS329 rear panel to restore the WS329 to its default
settings. Perform this operation with caution. After the WS329 is restored to its default settings, all
custom data and settings will be lost, and the password will be restored to admin.
1. Press the WS329 power button to power the WS329 on.
2. Press and hold WLAN/WPS button (more than 20 seconds).
The WS329 will restart, which will cause temporary network interruptions.
After the WS329 is restored to its default settings, change the computer IP address so that it
is in the same network segment as the 192.168.3.1 default IP address.
To Next Page
Loading...
Need help?
General
