22
23
User Programmable Address…
Added user security
Both the SRR transmitter and receiver
have an “address” that they use when
communicating with each other. If the
addresses do not match, the receiver will
ignore the transmission. The SRR comes
from the factory with both addresses set at
0. The transmitter address may be changed
to any setting from 0-127 for added
security. The receiver will then “learn the
address.” The programmable address is
useful for areas where multiple homes or
buildings are utilizing SRR remotes.
Programmable Number of
Stations Controlled…
Customize the remote to the number of
stations on the controller
The SRR is fully reprogrammable and
can access up to 48 stations, allowing for
increased exibility as well as use with
future controller products.
SRR Remote Control
To Next Page
Loading...
Need help?
General
