Maintenance Daily Weekly Monthly
Examine the fan impeller for contamination and clean the fan impeller if neces-
sary with a dull, long object.
X
To do a check of the air intake
1. Make sure that the air intake is not blocked on the
sides on the product.
2. Stop the product and remove leaves or unwanted
material if it is necessary.
CAUTION: A blocked air intake
decreases the blow capacity of the
product and increases the work
temperature of the motor. This can
result in motor failure because the motor
becomes too hot.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
Troubleshooting
User interface
User interface Possible faults Possible solution
Red error LED
flashes.
Temperature
deviation.
Let the product become cool.
Tube or fan
cover is re-
moved.
Assemble the tube or fan cover.
Battery error. Replace the battery or charge the battery.
Servicing is
necessary.
Speak to your servicing dealer.
The product
does not start.
Dirt in battery
connectors.
Clean with compressed air or a soft brush.
14 2034 - 002 - 17.01.2023
To Next Page
Loading...
Need help?
General