Husqvarna 135 User Manual

KEY TO SYMBOLS
8 – English
1154580-49 Rev.2 2013-03-11
Symbols in the operator’s
manual:
Switch off the engine before
carrying out any checks or
maintenance. CAUTION! The
start/stop switch automatically
returns to run position. In order to
prevent unintentional starting, the
spark plug cap must be removed
from the spark plug when
assembling, checking and/or
performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is started.
You will find the following labels on your chain saw:
USA:
Canada:
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal emissions requirements.
Maintenance, replacement, or repair of the emission
control devices and system may be performed by any
nonroad engine repair establishment or individual.

Husqvarna 135 Specifications

General

Cylinder Displacement	40.9 cm³
Weight	4.4 kg
Sound Pressure Level	102 dB(A)
Sound Power Level	114 dB(A)
Bar Length	14 in
Chain Pitch	3/8 inch
Chain Gauge	0.05 in
Oil Tank Volume	0.25 liters