EasyManuals Logo

Husqvarna CTH171 User Manual

Husqvarna CTH171
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Reduce the throttle setting during engine run-out and, if
the engine is provided with a shut-off valve, turn the fuel
off at the conclusion of mowing.
IV. Maintenance and Storage
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition.
Never store the equipment with petrol in the tank inside
a building where fumes may reach an open fl ame or
spark.
Allow the engine to cool before storing in any enclo-
sure.
To reduce the fi re hazard, keep the engine, silencer, bat-
tery compartment and petrol storage area free of grass,
leaves, or excessive grease.
Check the grass catcher frequently for wear or de te -
ri o ra tion.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done
outdoors.
On multi-bladed machines, take care as rotating one blade
can cause other blades to rotate.
When machine is to be parked, stored or left unattended,
lower the cutting means unless a positive mechanical lock
is used.
WARNING: Always disconnect spark plug wire and
place wire where it cannot contact spark plug in
order to prevent ac ci den tal start ing when setting
up, trans port ing, ad just ing or making re pairs.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna CTH171 and is the answer not in the manual?

Husqvarna CTH171 Specifications

General IconGeneral
Engine ManufacturerBriggs & Stratton
Transmission TypeHydrostatic
Cutting Height Positions6
Cutting Width42 inches
Cutting Height, min-max1.5-4 inches
Wheel Size15 inches (front), 18 inches (rear)

Related product manuals