EasyManuals Logo

Husqvarna M-ZT 61 User Manual

Husqvarna M-ZT 61
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
SAFETY
If fuel is spilled on clothing, change clothing
immediately.
Do not start the engine near spilled fuel.
Do not use gasoline as a cleaning agent.
If leaks arise in fuel system, the engine must
not be started until problem has been resolved.
Check the fuel level before each use and leave
space for the fuel to expand, as the heat from
the engine and the sun may otherwise cause
the fuel to expand and overow.
General Maintenance
Do not use the machine indoors or in spaces
lacking proper ventilation. The exhaust fumes
contain carbon monoxide, an odorless and
poisonous lethal gas.
Make sure that the equipment is in good
condition and that all nuts and bolts, especially
those fastening the blade attachments, are
properly tightened and torqued.
WARNING! The engine and the exhaust
system become very hot during operation.
There is a risk for burns if touched. Let engine
and exhaust system to cool before refueling.
Maintain or replace safety and instruction labels
as necessary.
Do not interfere
with the intended
function of a safety
device or reduce the
protection provided
by a safety device.
Check their proper
operation regularly.
NEVER operate a machine with a safety device
that does not function properly.
Check grass catcher components and the
discharge guard frequently and replace with
manufacturers recommended parts when
necessary.
WARNING! The engine must not
be started when the driver’s oor plate or
protective plates for the mower deck’s drive
belt is removed.
Do not mow near drop-offs, ditches, or
embankments. The machine could suddenly
roll over if a wheel is over the edge or the edge
caves in.
WARNING! Do not drive up or down hills
with slopes greater than 10 degrees. Do not
drive across slopes.
Safe Handling of Gasoline
To avoid personal injury or property damage, use
much more care in handling gasoline. Gasoline is
very ammable and the vapors are explosive.
Extinguish all cigarettes, cigars, pipes, and
other sources of ignition.
Use only approved gasoline containers.
Do not remove gas cap or add fuel with
the engine running. Let engine cool before
refueling.
Do not fuel the machine indoors.
Do not keep the machine or fuel container
where there is an open ame, spark or pilot light
such as on a water heater or other appliance.
Before you begin
refueling, minimize
the risk of static
electricity by
touching a metal
surface.
Do not ll containers
inside a vehicle or
on a truck or trailer
bed with plastic liner. Always place containers
on the ground away from the vehicle when
lling.
Do not overll fuel tank. Replace gas cap and
tighten securely.
Remove gas-powered equipment from the truck
or trailer and refuel it on the ground. If this is not
possible, refuel such equipment with a portable
container, rather than from a gasoline dispenser
nozzle.
Keep the nozzle in contact with the rim of the
fuel tank or container opening at all times until
fueling is complete. Do not use a nozzle lock-
open device.
CAUTION! Use protective glasses
for maintenance work.
Do not change the settings of governors and
avoid running the engine with overly high
engine speeds. If you run the engine too fast,
machine components could be damaged.
To reduce the risk of re, keep machine free of
grass, leaves or other debris buildup. Clean oil
or fuel spills and remove fuel-soaked debris. Let
machine cool before storing.

Other manuals for Husqvarna M-ZT 61

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna M-ZT 61 and is the answer not in the manual?

Husqvarna M-ZT 61 Specifications

General IconGeneral
Engine ManufacturerKawasaki
Engine NameFR Series
Engine TypeV-Twin
Engine Power24 hp
Cutting Width61 inches
Cutting Deck TypeFabricated
Transmission TypeHydrostatic
Weight770 lbs
Deck MaterialSteel
Cutting MethodsMulching/Side discharge
Cutting Height1.5 - 5 in
Warranty3 years
Fuel Capacity5 gallons

Related product manuals