Husqvarna RZ4219 BF User Manual

LUBRICATION
Front Wheel Mount
Lubricate with a grease gun, one zerk for each wheel
mount,
Use only good quality bearing grease,
Grease from well-known brand names (petrochemical
companies, etc,) usually maintains a good quality,
Front Wheel Bearings
Lubricate with a grease gun, one zerk for each set of
wheel bearings,
Use only good quality bearing grease,
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into contact
with belts or belt pulley drive surfaces.
Lubricating the wheel bearings
8050-009
Engine Lubrication
Refer to the engine manufacturer's manual for
maintenance and service instructions,
Steering Control Shafts
Tip the driver's seat,
Lubricate with a grease gun, one zerk for each
steering control shaft,
Use only good quality molybdenum disulphide
grease,
Grease from well-known brand names (petrochemical
companies, etc,) usually maintains a good quality,
Transmission
The transmission is maintenance free with no need for
level checks or oil changes, If a leak occurs, replace
the unit or contact the Husqvarna dealer,
Lubricating the steering control shafts
8058-076
42

Husqvarna RZ4219 BF Specifications

General

Engine Power	19 HP
Transmission	Hydrostatic
Deck Material	Steel
Cutting Width	42 inches
Engine	Briggs & Stratton
Blade Engagement	Electric
Seat Type	High-back
Warranty	3 year
Turning Radius	Zero-turn