EasyManuals Logo
Home>Husqvarna>Lawn Mower>Z 254

Husqvarna Z 254 User Manual

Husqvarna Z 254
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Winter Storage
The machine should be readied for storage at the end of the
mowing season or if it will not be in use for more than 30 days.
Fuel allowed to stand for long periods of time (30 days or
more) can leave sticky residues that can plug the carburetor
and disrupt engine function.
Fuel stabilizers are an acceptable option to prevent the sticky
residues that can occur during storage.
Add stabilizer to the fuel in the tank or in the storage container.
Always use the mixing ratios specified by the manufacturer
of the stabilizer. Run the engine for at least ten minutes after
adding the stabilizer so that it reaches the carburetor. Do not
empty the fuel tank and the carburetor if stabilizer has been
added.
To ready the machine for storage:
1. Thoroughly clean the machine, especially under the
mower deck. Touch up damage to the paint and spray
a thin layer of oil on the underside of the mower deck to
avoid corrosion.
2. Inspect the machine for worn or damaged parts and
tighten any nuts or screws that may have become loose.
3. Change the engine oil; dispose of properly.
4. Empty the fuel tanks or add a fuel stabilizer. Start the
engine and allow it to run until the carburetor is drained of
fuel or the stabilizer has reached the carburetor.
5. Remove the spark plug and pour about a tablespoon of
engine oil into the cylinder. Turn over the engine so that
the oil is evenly distributed and then refit the spark plug.
6. Lubricate all grease zerks, joints and axles.
7. Remove the battery. Clean, charge and store the battery in
a cool place, but protect it from direct cold.
8. Store the machine in a clean, dry place and cover it for
extra protection.
Service
When ordering spare parts, please specify the purchase year,
model, type, and serial number.
Always use genuine Husqvarna spare parts.
An annual check-up at an authorized service workshop is a
good way to ensure that your machine performs its best the
following season.
WARNING! Never store an engine with fuel in the
tank indoors or in poorly ventilated spaces where fuel vapor
can come in contact with open flames, sparks, or a pilot
light such as in a boiler, hot water tank, clothes dryer, etc.
Handle the fuel with care. It is very flammable and can
cause serious personal injury and property damage. Drain
the fuel into an approved container outdoors and store far
away from open flame or sources of ignition. Never use
gasoline for cleaning. Use a degreaser and warm water.
29
STORAGE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna Z 254 and is the answer not in the manual?

Husqvarna Z 254 Specifications

General IconGeneral
StyleZero Turn
ColorOrange
Cutting Width54 in
Cutting Height1.5 - 4 in
Cutting MethodCollect/Mulch/Side discharge
Number of Blades3
Drive SystemTransmission type - Hydrostatic
Case Size: U1RCCA: 450A
Noise Level-
FeaturesAdjustable
Accessories-
Motor / Engine ModelKawasaki FR Series
Power Output24 hp
Cylinders2
Generator5 A
Power / Fuel TypeGasoline
Fuel Tank Volume3.5 gal
SAE 5W30 (below 32°F/0°C)-
w/o Filter: 44 oz. (15.7 L (6 US. qt
Reverse: 0 - 2.9 mphForward: 17.0 kmh (10.6 mph)
Weight and Dimensions IconWeight and Dimensions
Depth75 in
Height40 in
Width67 in
Net Weight590 lbs

Related product manuals