Hypertherm MAXPRO200 Original Instructions

MAXPRO200 Instruction Manual 811270 15
Cut charts
Overview
Extreme bevel consumables
The MAXPRO200 extreme bevel consumables include the following components:
Standard MAXPRO200 retaining caps and swirl rings are compatible with extreme bevel
consumables. Refer to Extreme bevel cut charts on page 19.
The standard MAXPRO200 water tube is not compatible with extreme bevel consumables. You
must exchange it with the longer water tube (420823) prior to using extreme bevel consumables.
Part number Description Current Gas
420737 Shield 200 A Air and O
2
420735 Shield 130 A Air and O
2
420732 Electrode 200 A Air and O
2
420824 Electrode 130 A Air and O
2
420734 Nozzle 200 A Air
420829 Nozzle 130 A Air
420733 Nozzle 200 A O
2
420828 Nozzle 130 A O
2

Hypertherm MAXPRO200 Specifications

General

Brand	Hypertherm
Model	MAXPRO200
Category	Welding System
Language	English