Hytera HM68X User Manual

31
Description
Operation

Initiate an alert call, radio check, remote monitor, revive, or
kill service.

Switch to a function menu or realize a function.
Call/Menu
key, and then press and
hold the
PTT
key.
11.5 Roam
Roam allows the radio to select base stations according to signal strength. This ensures seamless communication across
sites or networks.

To enable Roam, do either of the following:

Press the preprogrammed
Roam
key.

On the home screen, go to
Menu
>
Roaming
>
On/Off
, and then press the
OK/Menu
key.

To set the roam list, do the following:
a.
On the home screen, go to
Menu
>
Roaming
>
Roaming List
.
b.
Select a roam list.
c.
Do any of the following:

To view or manage all channels on the current list, select
View Record
, and then press the
OK/Menu
key.

To set the list as the default scan list for the current channel, select
Set Default
, and then press the
OK/Menu
key.

To add a new channel to the list, select
Add CH
, and then press the
OK/Menu
key.
11.6 Clarity Transmission
Clarity Transmission allows data to be transferred from one external device to another using the radio. The radio serves
as the transparent transmission channel for data exchange between external devices without any additional adjustment.
When the radio receives the data through the serial port, it transfers the data to a preset contact excluding an all call
contact. If the radio fails to receive the data, it will exit Clarity Transmission.
With Clarity Transmission configured by your dealer, to enable Clarity Transmission, press the preprogrammed
Clarity
Transmission Mode
key.
11.7 Ignition Sense
Ignition Sense controls the radio on or off and the
PTT
key enabled or disabled by starting or stopping your vehicle
engine.

Hytera HM68X Specifications

General

Brand	Hytera
Model	HM68X
Category	Radio
Language	English