1-7
Check the weight, length, width and height of the
truck referring to the chapter 8, specifications
when you are going to hoist the tractor.
Before loading the tractor, battery must be
removed. Refer to page 4-4 for a safe battery
removal.
7. LOADING AND UNLOADING BY CRANE
BP157OM163
1)
Use long wire rope and stay to keep the distance
with the tractor as it should avoid touching with the
truck body.
Put a rubber plate where the wire rope contact
with the tractor's body to prevent damage.
Place crane on the proper place.
Install the wire rope and stay like the illustration.
Make sure wire rope is proper size.
The wrong hoisting method or installation of
wire rope can cau
se damage to driver and
tractor.
Do not load abruptly.
Keep area clear of personnel.
2)
3)
4)
5)
Do not install the wire to unsafe position such
as seat, steering wheel, front cover, etc.. It can
caus
e a serious damage to driver and tractor.
If there is any problem to lift a tractor, please
contact you
r dealer.
Perform the lifting service with skilled service
man.
To Next Page
Loading...
General