4103
Features of your vehicle
Auto light position
When the light switch is in the AUTO
light position, the parking lights and
headlights will be turned ON or OFF
automatically depending on the
amount of light outside the vehicle.
• Never place anything over sensor
(1) located on the instrument
panel. This will ensure better auto-
light system control.
• Do not clean the sensor using a
window cleaner. The cleaner may
leave a light film which could inter-
fere with sensor operation.
• If your vehicle has window tint or
other types of metallic coating on
the front windshield, the Auto light
system may not work properly.
High beam operation
To turn on the high beam headlights,
push the lever away from you. Pull it
back for low beams.
The high beam indicator will light
when the headlight high beams are
switched on.
To prevent the battery from being
discharged, do not leave the lights
on for a prolonged time while the
engine is not running.
OHG041115AOHG041113A
To Next Page
Loading...
Need help?
General
