Hyundai 35D-7E User Manual

3-28
5. OPERATING LEVER AND SWITCH
There are four positions, HEAT, OFF, ON and START.
Before starting, set gear shift lever at N, and pull parking
brake.
 HEAT : Preheating electrical circuit activates. (20~33DF-7)
0~10 Á C : 5~10 seconds, below 0 Á C : 10~20 seconds.
 OFF : None of electrical circuits activates.
 ON : All the systems of machine operate.
Preheat the system for
AA
seconds except 20~33DF
-7. (see below table)
 START : Use when starting the engine.
Release key immediately after starting.
START SWITCH
(1)
ö
11)
OFF
ON
START
HEAT
D255OM10
Clearance lamp lights up
Twist the handle beneath steering wheel and make the notch
align to or .
Clearance lamp goes out
Twist the handle just opposite until the notch being aligned to
ùù
or ú .
When clearance lamp light up, then the Clearance lamp
and all panel lamps light up too.
CLEARANCE LAMP
SWITCH
(1)
(2)
ö
2
2)
1.5 ~ 4.5 ton, 50DA-7E
5.0 ~ 8.0 ton
Head lamp lights up
Twist the handle beneath steering wheel and make the notch
align to or .
Small lamp goes out
Twist the handle just the opposite direction described as
above.
HEAD LAMP SWITCH
(1)
(2)
3)
35DS7EOM92
1.5 ~ 4.5 ton, 50DA-7E
5.0 ~ 8.0 ton
35DS7EOM91
Model
A
15D/18D/20DA-7E
20D/25D/30D/33D-7E, 35DF
5~10
35D/40D/45D-7E, 50D-7AE
50D/60D/70D-7E, 80D-7E
50DF/60DF/70DF-7
35DS/40DS/45DS/50DA-7E
50DS/60DS/70DS-7E
10~20
Key must be in the ON position with engine running to
maintain electrical and hydraulic function and p
revent
serious machine damage.
ö
1.5~4.5 ton, 50DA-7E,
50DF/60DF/70DF-7
1.5~4.5 ton, 50DA-7E,
50DF/60DF/70DF-7

Hyundai 35D-7E Specifications

General

Brand	Hyundai
Model	35D-7E
Category	Forklifts
Language	English