Features of your vehicle
904
Headlight leveling device
(if equipped)
To adjust the headlight beam level
according to the number of the pas-
sengers and loading weight in the
luggage area, turn the beam leveling
switch.
The higher the number of the switch
position, the lower the headlight
beam level. Always keep the head-
light beam at the proper leveling
position, or headlights may dazzle
other road users.
Listed below are the examples of
proper switch settings. For loading
conditions other than those listed
below, adjust the switch position so
that the beam level may be the near-
est as the condition obtained accord-
ing to the list.
Interior lights
OMD040197L
Loading condition Switch position
Driver only 0
Driver + Front passenger 0
Full passengers
(including driver)
1
Full passengers (including
driver) + Maximum permis-
sible loading
2
Driver + Maximum permis-
sible loading
3
CAUTION
Do not use the interior lights for
extended periods when the
engine is turned off or the bat-
tery will discharge.
WARNING
Do not use the interior lights
when driving in the dark. The
interior lights may obscure your
view and cause an accident.
To Next Page
Loading...
Need help?
General
