HYBC-2004
3. ABOUT HYBC-20
1) The HYBC-20 is designed for charging all types of 12V and 24V lead-acid batteries, including WET
(Flooded), MF (Maintenance-Free), EFB (Enhanced Flooded Battery), GEL, AGM (Absorbed Glass Mat)
batteries. It is suitable for charging battery capacities from 2 to 400 Amp-Hours and maintaining all
battery sizes.
2) Built-in intelligent microprocessor makes charging faster, easier and safer.
3) This charger has safety features, including spark proof, protection for reverse polarity, short circuit,
overheat and overcharge.
4) Automatically detect 12V or 24V battery or selected by manual within starting 10 seconds.
5) When the CHARGING LED is on, it is on charging; when the
CHARGING
LED is off and
FULL LED is
on, the charging is completed. But do NOT break the connection immediately. It will
automatically
switches from full charge to maintenance status without overcharging or damaging the battery.
6) It shows present voltage when VOLTAGE button is pressed.
7) Following is the charger’s technical specification:
AC Input AC 220~240V, 50/60Hz, 350W Max
DC Output DC 12V 2A/4A/6A/8A/10A/15A, DC 24V 3.5A/7.5A, DC 12V 20A 300s(Boost)
Power (IN) Variable Power, 350W Max
Efficiency 85% Approx
Back Current Drain <5mA
Ambient Temperature 0˚C ~ +40˚C
Charger Type 8 steps, Full-automatic Charging Cycle
Battery Type All Types of 12V&24V Lead-acid Batteries
Battery Capacity 2-400Ah (12V), 14-200Ah (24V), Maintains All Battery Sizes
Housing Protection IP20
Accessories Included Cable Clamps
To Next Page
Loading...
Need help?
General
