Assembly
19
1. Slide the grass bag frame into the grass bag and attach the clips as shown.
2. Lift the rear discharge guard up.
3. Hook the grass collector bag onto the rear of lawn mower.
4. Fold the rear discharge guard down and ensure it fits snuggly onto the grass collector lid.
4. Place the upper handle on the lower handle.
5. Attach the upper handle.
6. Insert the threaded bolt through the holes in the upper handle and the lower handle.
7. Fasten the screw with the triangle knob.
Step 2 : Attach The Grass Collector
To Next Page
Loading...
Need help?
General
Weight and Dimensions
