www.hyundaipowerproducts.co.uk
30
Maintenance & Care
Replacing Trimmer Line
1. Turn the trimmer so that the cutting head is facing upwards. Squeeze the two
tabs on the spool cover. See image 1.
2. Pull spool cover away from spool. See image 2.
3. Cut two lengths of nylon trimmer line 5m in length and insert the end of each line
into the two holes in the trimmer spool reel. See image 3.
4. Wind the trimmer line around the reel in the direction of the arrow. See image 4.
Image 1
Image 2
Image 3
Image 4
!
WARNING : Make sure the machine is disconnected from the power supply.
We recommend using 1.3mm, 1.4mm or 1.5mm nylon grass trimmer line.
To Next Page
Loading...
Need help?
General
