6-17
What to do in an emergency
6
Jack label
1. Model Name.
2. Maximum allowable load.
3. When using the jack, set your
parking brake.
4. When using the jack, stop the
engine.
5. Do not get under a vehicle that is
supported by a jack.
6. The designated locations under
the frame.
7. When supporting the vehicle, the
base plate of jack must be vertical
under the lifting point.
8. Shift into Reverse gear on vehi-
cles with manual transaxle or
move the shift lever to the P posi-
tion on vehicles with automatic
transaxle/dual clutch transmis-
sion.
9. The jack should be used on firm
level ground.
10. Jack manufacturer.
11. Production date.
12. Representative company and
address.
OHYK064002
OHYK064005GB
• Type A
n Example
• Type B
h The actual Jack label in the vehicle may differ from the illustration.
For more detailed specifications, refer to the label attached to the jack.
To Next Page
Loading...
Need help?
General
