6-22
What to do in an emergency
Using the Tire Mobility Kit
1. Detach the speed restriction label
(0) from the sealant bottle (1), and
place it in a highly visible place
inside the vehicle such as on the
steering wheel to remind the driv-
er not to drive too fast.
2. Screw connection hose (8) onto
the connector of the sealant bottle.
3. Unscrew the valve cap from the
valve of the defective wheel and
screw filling hose (2) of the
sealant bottle onto the valve.
4. Insert the sealant bottle into the
housing (4) of the compressor so
that the bottle is upright.
5. Ensure that the compressor is
switched off, position 0.
6. Plug the compressor power cord
into the vehicle power outlet.
Securely install the sealant filling
hose to the valve. If not, sealant
may flow backward, possibly
clogging the filling hose.
NOTICE
OGB064006 OHY015012
To Next Page
Loading...
Need help?
General
