Hyundai i20 User Manual

3-133
Convenient features of your vehicle
3
Windshield defrosting and
defogging
• For maximum defrosting, set the
temperature control to the extreme
right/hot position and the fan
speed control to the highest speed.
• If warm air to the floor is desired
while defrosting or defogging, set
the mode to the floor-defrost posi-
tion.
• Before driving, clear all snow and
ice from the windshield, rear win-
dow, outside rear view mirrors, and
all side windows.
• Clear all snow and ice from the
hood and air inlet at the buttom of
the windshield.
• If the engine temperature is still
cold after starting, then a brief
engine warm up period may be
required for the vented air flow to
become warm or hot.
Manual climate control system
To defog inside windshield
1. Select desired fan speed.
2. Select desired temperature.
3. Select the or position.
4. The outside (fresh) air will be
selected automatically. Additio-
nally, the air conditioning (if
equipped) will automatically oper-
ate if the mode is selected to the
or position.
If the air conditioning and outside
(fresh) air position are not selected
automatically, press the correspon-
ding button manually.
Do not use the or posi-
tion during cooling operation in
extremely humid weather. The
difference between the temper-
ature of the outside air and that
of the windshield could cause
the outer surface of the wind-
shield to fog up, causing loss of
visibility. Set the mode selec-
tion to the position and fan
speed control to a lower speed.
WARNING
OIB044076

Hyundai i20 Specifications

General

Brand	Hyundai
Model	i20
Category	Automobile
Language	English