7-74
Maintenance
FUSES
A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the driver’s side panel
bolster, the other in the engine com-
partment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse.
If a fuse has blown, the element
inside the fuse will melt.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem.
Avoid using the system involved and
we recommend that you consult an
authorized HYUNDAI dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and multi fuse for higher
amperage ratings.
Do not use a screwdriver or any
other metal object to remove fuses
because it may cause a short cir-
cuit and damage the system.
Information
The actual fuse/relay panel label may
differ from equipped items.
i
NOTICE
OTA070039
Normal
Normal
n Cartridge type
n Multi fuse
B
B
l
l
o
o
w
w
n
n
Normal
n Blade type
B
B
l
l
o
o
w
w
n
n
B
B
l
l
o
o
w
w
n
n
Fuse replacement
• Never replace a fuse with any-
thing but another fuse of the
same rating.
• A higher capacity fuse could
cause damage and possibly a
fire.
• Never install a wire or alumi-
num foil instead of the proper
fuse - even as a tmporary re-
pair. It may cause extensive
wiring damage and a possible
fire.
WARNING
To Next Page
Loading...
Need help?
General
