7-75
7
Maintenance
Instrument panel fuse
replacement
1. Turn the ignition switch and all
other switches off.
2. Open the fuse panel cover.
OGB074006
(Continued)
• Do not input any other objects
except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system
malfunction.
• If some lamps (Headlamp,
front fog lamp, rear fog lamp,
stop lamp and DRL) are not
working, check the bulb of
lamp. Then, if the bulb of lamp
is normal, we recommend that
you consult an authorized
HYUNDAI dealer.
• When replacing a blown fuse
or relay with a new one, make
sure the new fuse or relay fits
tightly into the clips. The
incomplete fastening fuse or
relay may cause the vehicle
wiring and electric systems
damage and a possible fire.
• Do not remove fuses, relays
and terminals fastened with
bolts or nuts. The fuses,
relays and terminals may be
fastened incompletely, and it
may cause a possible fire. If
fuses, relays and terminals
fastened with bolts or nuts are
blown, we recommend that
you consult an authorized
HYUNDAI dealer.
(Continued)
CAUTION
To Next Page
Loading...
Need help?
General
