7-106
Maintenance
License plate light bulb
replacement
1. Using a flat-blade screwdriver,
remove the light assembly from
the body of the vehicle by prying
the housing and pulling the
assembly out.
2. Separate the socket and the lens
part by turning the socket counter-
clockwise until the tabs on the
socket align with the slots on the
lens part.
3. Remove the bulb by pulling it
straight out.
4. Insert a new bulb in the socket.
5. Reassemble the socket and the
housing part.
6. Reinstall the light assembly to the
body of the vehicle.
1. Using a flat-blade screwdriver
gently pry the lens cover from the
lamp housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb.
4. Reinstall in the reverse order.
OIB074040
n 3 Door
OIB077078
n 5 Door, Cross
To Next Page
Loading...
Need help?
General
