Rear seat entry
(3 Door vehicle only)
To get in or get out of the rear seat,
the driver’s or front passenger’s seat
should be folded and the seat should
be slide.
1.Fold the front seatback by pulling
up the walk-in seat lever and then
slide the front seat forward.
2.Set the belt extension guide to
position (3).
3.After getting in or getting out, slide
the seat rearward while holding the
seat cushion and then push the
seatback rearward. And set the
belt extension guide to position (1)
or (2).
2-9
Safety system of your vehicle
2
OGB035047
OGB035045
OGB035045/H
n Driver’s seat
n Front passenger’s seat
To Next Page
Loading...
Need help?
General
