7-53
7
Maintenance
3. Push in both sides of the glove
box as shown. This will ensure
that the glove box stopper pins will
get released from its holding loca-
tion allowing the glove box to
hang.
4. Remove the climate control air fil-
ter cover (2) by pushing or press-
ing the clip (1).
5. Replace the climate control air fil-
ter.
6. Reassemble in the reverse order
of disassembly.
Information
When replacing the climate control
air filter install it properly. Otherwise,
the system may produce noise and the
effectiveness of the filter may be
reduced.
i
ODH073012OGB074004OGB074030
To Next Page
Loading...
Need help?
General
