Features of your vehicle
244
Automatic reversal
During power opening and closing if the
power tailgate is blocked by an object or
part of the body, the power tailgate will
detect the resistance.
• If the resistance is detected while
opening the tailgate, it will stop and
move in the opposite direction.
• If the resistance is detected while clos-
ing the tailgate, it will stop and move in
the opposite direction.
However, if the resistance is weak such
as from an object that is thin or soft, or
the tailgate is near the latched position,
the automatic stop and reversal may not
detect the resistance.
If the automatic reversal feature operates
continuously more than twice during
opening or closing operation, the power
tailgate may stop at that position. At this
time, close the tailgate manually and
operate the tailgate automatically again.
How to reset the power tailgate
If the battery has been discharged or dis-
connected, or if the related fuse has
been replaced or disconnected, for the
power tailgate to operate normally, reset
the power tailgate as follow:
1. Put the shift lever in P (Park).
2. Press the tailgate handle switch and
tailgate close button at the same time
for more than 3 seconds. (the chime
will sound)
3. Close the tailgate manually.
If the power tailgate does not work prop-
erly after the above procedure, have the
system checked by an authorized
HYUNDAI dealer.
✽✽
NOTICE
If the power tailgate does not operate
normally, first check the following con-
dition before using the power tailgate.
Check if the shift lever is in:
• neutral for manual transaxle vehicles
• P (Park) for automatic transaxle vehi-
cles
OVF041017
WARNING
Never intentionally place any object
or part of your body in the path of
the power tailgate to make sure the
automatic reversal operates.
To Next Page
Loading...
Need help?
General
