4149
Features of your vehicle
Luggage rail system
The luggage rail system may prevent the
luggage from sliding around in the lug-
gage compartment.
Build in segmentation bar
• Put both pillars (A) from the segmenta-
tion bar in the openings from the rail.
• To move the segmentation bar, put
your hand on the side of the pillar and
push down the lever arm (B).
• Make sure the pillars click into place.
• To release the belt, turn the upper ele-
ment (C) to the left (1) or right until it
clicks.
• Now you can pull the belt (D) and
secure your luggage by putting the belt
around the luggage and put the hook
(E) into the middle of the segmentation
bar (F).
• For bulky luggage, you can hook both
hooks into each other.
• To make sure the belt locks, put the
upper element (C) back into the lock
position (1).
OVF041191
CAUTION
• The segmentation bar must be
mounted and demounted with
both pillars simultaneously.
• Max. load: 30 kg with one belt
40 kg with two belts
To Next Page
Loading...
Need help?
General
