not attempt to jump start the high voltage battery, as it cannot be jump started. In case
discharge of the high voltage battery, the vehicle must be towed as mentioned on
page. In case the 12V auxiliary battery is discharged, refer the below procedure.
9. Important additional information
not attempt to jump start the IONIQ 6 high voltage battery.
to follow these instructions will lead to serious bodily injury or death by electrical shock.
1. Make sure the booster battery is 12V and that its negative terminal is grounded.
2. If the booster battery is in another vehicle, do not allow the vehicles to come in contact.
3. Turn off all unnecessary electrical loads.
4. Open the hood and then remove the 12V battery cover (A) (refer the 8 page).
5. Connect the jumper cables in the exact sequence shown in the illustration.
First connect one end of a jumper cable to the positive terminal of the discharged battery
(1), then connect the other end to the positive terminal on the booster battery (2).
Proceed to connect one end of the other jumper cable to the negative terminal of the
booster battery (3), then the other end to a solid, stationary, metallic point away from
the fuse box (4).
24
A
To Next Page
Loading...
Need help?
General
