CONTROLLER MANUAL
1-10
CONTROLLER MANUAL – SFC/SFB SERIES BOILERS
ACCESSING THE INFORMATION MENU
The Information menu provides sensor readings as well as other operating
conditions in the form of codes.
To access the Information menu:
1. Touch the area above the Dot twice to access the Main menu.
You’ll need to access the Information menu via the Service menu.
2. To access the Service menu, touch and hold the Wrench button for two
seconds.
The Minus, Plus, Wrench and Enter indicators are displayed.
3. Again, touch and hold the Wrench button for two seconds.
You are now in the Information menu. Note that the Enter button has
disappeared indicating that you are in read-only mode and therefore cannot
enter values.
In the Information menu, the code “A” appears to indicate the ame current in
DC µA (see table 2 for a list of codes and corresponding description).
4. To scroll through the list of codes, use the Minus or Plus button.
5. To switch out of the Information menu (and to return to the Service menu),
press the Flame button or area above the Dot.
To Next Page
Loading...
Need help?
General
