Table 1. Reason Codes for Rejected Program Start Requests (continued)
Reason
Code Reason Description
901 Program initialization parameters are not valid.
902 Number of parameters for program not valid.
903 Program initialization parameters required but not present.
1001 System logic error. Function check or unexpected return code encountered.
1002 System logic error. Function check or unexpected return code encountered while receiving program
initialization parameters.
1501 Character in procedure name not valid.
1502 Procedure not found.
1503 System/36 environment library not found.
1504 Library QSSP not found.
1505 File QS36PRC not found in library QSSP.
1506 Procedure or library name is greater than 8 characters.
1507 Current library not found.
1508 Not authorized to current library.
1509 Not authorized to QS36PRC in current library.
1510 Not authorized to procedure in current library.
1511 Not authorized to System/36 environment library.
1512 Not authorized to file QS36PRC in System/36 environment library.
1513 Not authorized to procedure in System/36 environment library.
1514 Not authorized in library QSSP.
1515 Not authorized to file QS36PRC in QSSP.
1516 Not authorized to procedure in QS36PRC in QSSP.
1517 Unexpected return code from System/36 environment support.
1518 Problem phase program not found in QSSP.
1519 Not authorized to problem phase program in QSSP.
1520 Maximum number of target programs started (100 per System/36 environment).
2501 System logic error. Function check or unexpected return code encountered while processing a program
start request.
2502 Temporarily unable to allocate needed resources for a program start request.
2503 No subsystem accepting program start requests for this device.
86 Version 5
To Next Page
Loading...
Need help?
General
