Chapter 2. System Board Features
Switch 8 controls writes to the diskette drive.
System Board Jumper
A jumper is provided on the system board for clearing CMOS memory. Refer to
Installing Options in Your
IntelliStation M Pro
and
Using Your IntelliStation M Pro
for important information on clearing CMOS.
Table 14. Diskette Drive Write Access (Switch 8)
Write enabled (normal operation) Off (factory default)
Write protected (read only) On
Table 15. CMOS Operation
Function Jumper Position
Normal operation (factory default) 1-2
Clear CMOS 2-3
22 Technical Information Manual
To Next Page
Loading...
Need help?
General
