IBM Power System S924 User Manual

Service processor card for the 9009-41A, 9009-41G,
9009-42A, 9009-42G, 9223-42H, or 9223-42S
Find information about removing and replacing the service processor card in the IBM Power
®
System
S914 (9009-41A and 9009-41G), IBM Power System S924 (9009-42A and 9009-42G), IBM Power
System H924 (9223-42H), or IBM Power System H924S (9223-42S) server.
Removing and replacing the service processor card in the 9009-41A,
9009-41G, 9009-42A, 9009-42G, 9223-42H, or 9223-42S
Find information about removing and replacing the service processor card in the IBM Power System S914
(9009-41A and 9009-41G), IBM Power System S924 (9009-42A and 9009-42G), IBM Power System
H924 (9223-42H), or IBM Power System H924S (9223-42S) system.
About this task
Removing and replacing the service processor card is a nonconcurrent procedure, which requires the
system to be powered off. The service processor card is installed into slot P1-C1.
If your system is managed by the Hardware Management Console (HMC), use the HMC to repair a part in
the system. For instructions, see Repairing a part by using the HMC (www.ibm.com/support/
knowledgecenter/POWER9/p9haj/p9haj_hmc_repair.htm).
If your system is not managed by an HMC, complete the steps in the following procedures to remove and
replace the service processor card.
Preparing the 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-42H, or 9223-42S
system to remove and replace the service processor card
To prepare the system to remove and replace the service processor card, complete the steps in this
procedure.
Procedure
1. Access the Advanced System Management Interface (ASMI).
For instructions, see Accessing the ASMI without an HMC
(www.ibm.com/support/knowledgecenter/
POWER9/p9hby/connect_asmi.htm).
2. Check and record the current rmware level.
On the ASMI Welcome pane, view the existing level of server rmware in the upper-right corner
under the copyright statement, for example, 01EM310 or FW760.00 (AM760_019).
3. Check and record the following service processor card settings:
• System Name
• System Power Control
• System Service Aids
• System Conguration
• Network Services
• Performance Option
• Login Prole
4. Identify the part and the system that you are working on. For instructions, see Identifying a
part (www.ibm.com/support/knowledgecenter/POWER9/p9haj/sal.htm).
Use the blue identify LED on the enclosure to locate the system. Ensure that the serial number of the
system matches the serial number to be serviced.
©
Copyright IBM Corp. 2018, 2020 1

IBM Power System S924 Specifications

General

Brand	IBM
Model	Power System S924
Category	Computer Hardware
Language	English