IBM ThinkPad 310E Troubleshooting Guide

Troubleshooting Charts
8-8
IBM ThinkPad 310E/310ED: User’s Guide
Error Codes Action
056 There is a problem with the hard disk drive auto-detect function. Do the following:
•
Incorrect connection of the hard disk drive can cause this error codes to appear.
−
Turn off the computer and try reconnecting the hard disk drive (see pages 6-2
to 6-3). Then turn on the computer.
•
Verify the Auto-detect setting of the hard disk drive.
−
Reboot the computer and press
F2
during POST to enter the BIOS Utility.
−
Access the
Basic System Settings
screen and set the
Hard Disk Drive
parameter to
Auto
.
−
Exit BIOS Utility and save the changes.
If the same screen message appears, have the computer serviced.
054, 055 The hard disk drive is disabled or write-protected. Do the following:
1. Turn off the computer.
2. During POST, press
F2
to enter the BIOS Utility.
3. Go to the
System Security
screen.
4. Change the
Hard Disk Drive
control setting to
Normal
.
5. Exit the BIOS Utility and save the changes.
070 There is a problem with the real-time clock. Have the computer serviced.
071, 072 There is a problem with the CMOS. Have the computer serviced.
081 There is a system resource conflict. Do the following:
1. Turn off the computer.
2. During POST, press
F2
to enter the BIOS Utility.
3. Go to the
System Security
screen and make sure no I/O addresses are shared by
two devices.
4. Exit the BIOS Utility and save the changes.
If the problem persists, have the computer serviced.

IBM ThinkPad 310E Specifications

General

Brand	IBM
Model	ThinkPad 310E
Category	Laptop
Language	English