IBM TS7700 Series User Manual

August 15, 2017
© Copyright IBM Corporation, 2017 Page 30 of 117
Copy Export Progress Messages
During the execution of the copy export operation or a reclaim operation for a copy exported stacked
volume, the TS7700 sends informational messages to its attached hosts to keep operations aware of
execution progress. On z/OS hosts, the message results in a console message being written in the following
format:
CBR3750I Message from library library-name: message text
Where library-name will be the distributed library name of TS7700 performing the export operation and the
message text provides the progress message. The message text includes a 5 character message identifier that
could be used for message automation routing. The following table describes the messages and any actions
that may be required.
Note: Not all message identifiers are used.
Message Description
Action Needed
E0000 EXPORT OPERATION STARTED FOR EXPORT LIST
VOLUME XXXXXX
This message is generated when the TS7700 begins the copy export
operation.
None.
E0002 OPENING EXPORT LIST VOLUME XXXXXX FAILED
This message is generated when opening Export List File Volume
fails during copy export operation.
Check if the Export List Volume
or cache file system is in bad
state or not.
E0005 ALL EXPORT PROCESSING COMPLETED FOR
EXPORT LIST VOLUME XXXXXX
This message is generated when the TS7700 completes an export
operation.
None.
E0006 STACKED VOLUME YYYYYY FROM LLLLLLLL IN
EXPORT-HOLD
This message is generated during copy export operations when an
exported stacked volume ‘YYYYYY’ has been assigned to the
export-hold category. The ‘LLLLLLLL’ field is replaced with the
distributed library name of the TS7700 performing the export
operation.
Refer to section “Removing
Copy Exported Volumes from a
Library”
E0006 STACKED VOLUME YYYYYY FROM LLLLLLLL IN
EJECT
This message is generated during copy export operations when an
exported stacked volume ‘YYYYYY’ has been assigned to the eject
category. The physical volume will be placed in the convenience I/O
station. The ‘LLLLLLLL’ field is replaced with the distributed
library name of the TS7700 performing the export operation.
Remove ejected volumes from
the convenience I/O station.

IBM TS7700 Series Specifications

General

Brand	IBM
Model	TS7700 Series
Category	Storage
Language	English